Paseo Coupe L4-1497cc 1.5L DOHC MFI (1997)
b. Using the 09613 - 12010 SST, remove the valve assembly with the oil seal and bearing.
NOTE: Never attempt to tap out the control valve as this would damage it.
c. Remove the oil seal from the valve assembly.
d. Using the 09950 - 40010 (09951 - 04010, 09952 - 04010, 09953-04020, 09954-04010, 09955-04050, 09957-04010, 09958-04010) SST,
remove the bearing from the valve assembly.
NOTE: Be careful not to damage the valve assembly.
13. Using a brass bar and a hammer, tap out the bearing and remove the bearing from the rack housing.
14. Remove the cylinder end stopper and bushing by doing these procedures.
a. Using the 09631 - 20090 SST, remove the stopper.
b. Remove the bushing from the stopper.
15. Remove the steering rack with the oil seal by following these steps.
a. Using the 09612 - 24014 (09612 - 10061) SST and a press, press out the rack with the oil seal.
NOTE: Take care not to drop the rack.
b. Remove the oil seal from the rack.