Pickup 2WD L4-144.4 2366cc 2.4L SOHC (22R-E) (1984)
Wheel Hub (Locking): All Technical Service Bulletins
Locking Hub - (Automatic) Grease Recommendation
FRONT AND
REFERENCE
REAR AXLE
NUMBER
005
DATE
2-24-84
MODEL
RN66
When servicing the automatic locking hubs, it is important that the following types of grease, or their equivalent, with a temperature range of at least 302
degrees F to 392 degrees F is used. The high operating temperature ranges will prevent lubrication seepage during normal operation of the automatic
locking hub system.
Distributor
Recommended Grease
Arco
Caldron EP-2
Castrol
Castrol WB
For detailed servicing procedures of the automatic locking hubs, refer to the appropriate repair manual.