Pickup 2WD L4-2466cc DSL (1984)
d. Using a spring tension gauge, measure the frictional force of the oil seal.
e. Adjust the preload by tightening the nut.
Preload (rotating):
Frictional force plus 0.6-1.8 kg (1.3-4.0 lb, 5.9-18 N).
f.
Measure the hub axial play.
Limit: 0.05 mm (0.0020 in.).
6. Install lock nut, cotter pin and hub grease cap.
7. Install torque plate onto steering knuckle.
Torque: 1,000-1,200 kg-cm (73-86 ft-lb, 99-117 Nm).
8. Install brake cylinder onto torque plate.
Torque: 850-950 kg-cm (62-68 ft-lb, 84-93 Nm).