Pickup 2WD L4-2466cc DSL (1984)
Counter Gear: Testing and Inspection
W46, W55, and W56 Transmissions
NOTE: For measurements to be taken during disassembly, refer to Disassembly of Transmission. See: Service and Repair
SECOND AND COUNTER FIFTH GEAR OIL CLEARANCE INSPECTION
Using a dial indicator, measure the oil clearance between the gear and shaft with the needle roller bearing installed. stalled.
Standard clearance:
2nd gear
0.009 - 0.060 mm (0.0004 - 0.0024 in.)
5th gear
0.009 - 0.062 mm (0.0004 - 0.0024 in.)
Maximum clearance:
0.15 mm (0.0059 in.)
If the clearance exceeds the limit, replace the gear, shaft or needle roller bearing.