Pickup 2WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)
2. MEASURE RESISTANCE OF ECU NOTICE
a. Do not touch the ECU terminals.
b. The tester probe should be inserted into the wiring connector from the wiring side.
Check the resistance between each terminal of the wiring connector.
-
Remove the right kick panel.
-
Unplug the wiring connectors from the ECU.
Resistance At ECU Wiring Connectors
-
Measure the resistance between each terminal of the wiring connectors.
Manual Transmission Except C & C
# 1.
ECU Power Supply / Main Relay