Pickup 2WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1989)
Clutch Pedal Assembly: Testing and Inspection
CHECK AND ADJUSTMENT OF CLUTCH PEDAL
1. CHECK THAT PEDAL HEIGHT AND PUSH ROD PLAY ARE CORRECT
Pedal height
(from asphalt sheet):
2WD 154.5 mm (6.0827 in.)
4WD 151.5 mm (5.9646 in.)
(from floor panel):
157.5 mm (6.201 in.)
Push rod play at pedal top:
1.0 - 5.0 mm (0.039 - 0.197 in.)
If incorrect, adjust the pedal height and push rod play.
2. IF NECESSARY, ADJUST PEDAL HEIGHT AND PUSH ROD PLAY
(a) Loosen the lock nut and turn the stopper bolt until the height is correct. Tighten the lock nut.
(b) Loosen the lock nut and turn the push rod until the push rod play is correct. Tighten the lock nut.
3. CHECK THAT PEDAL FREEPLAY IS CORRECT
Push in on the pedal until the beginning of clutch resistance is felt.
Pedal freeplay: 5 - 15 mm (0.20 - 0.59 in.)
4. IF NECESSARY, ADJUST PEDAL FREEPLAY
(a) Loosen the lock nut and turn the push rod until the freeplay is correct.
(b) Tighten the lock nut.
(c) After adjusting the pedal freeplay, check the pedal height.