Pickup 4WD L4-2366cc 2.4L SOHC (22R) (1984)
Camshaft Assembly
Rocker Shaft Washer Replacement Procedure
1.
Remove the cylinder head cover.
2.
Rotate the crankshaft until clearance exists between No. 2 and 3 intake rocker arms and the cam lobes.
ROCKER SHAFT WASHER LOCATION
3.
Remove the rocker shaft washer by sliding the rocker arm and cutting the washer with a diagonal cutter. Remove and discard old washers.
Note:
Resin washers are very brittle and may shatter. Technician should wear safety goggles as a precaution.
ROCKER SHAFT WASHER INSTALLATION
4.
Install the two-piece type rocker shaft washer.
Note:
Make sure the washer is securely installed.
5.
Adjust valve clearance.