Pickup 4WD L4-2366cc 2.4L SOHC (22R) (1984)
/Page-175002.png)
3. REMOVE FLUID COUPLING WITH FAN AND WATER PUMP PULLEY
(a) Loosen the water pump pulley set bolts.
(b) Loosen the belt adjusting bolt and pivot bolt of the alternator, and remove the drive belt.
(c) Remove the set nuts, fluid coupling with fan and water pump pulley.
4. REMOVE CRANKSHAFT PULLEY
(a) (with A/C) Remove the No.2 crankshaft pulley.
(b) Using SST to hold the crankshaft pulley, loosen the pulley bolt.
SST 09213-70010 and 09330-00021
(c) Using SST, remove the crankshaft pulley.
SST 09213-31021
5. REMOVE NO.1 WATER BY-PASS PIPE
(22R) Remove the three bolts and pipe.
(22R-E) Remove the two bolts and pipe.
(22R-TE) Remove the two bolts, and disconnect the pipe from the timing chain cover.
