Pickup 4WD L4-2366cc 2.4L SOHC (22R) (1984)
90119-08125
Bolt w/Washer (for oil cooler stay/bracket)
4
91651-40814
Bolt w/Washer (for air-cooled oil cooler)
2
91651-40316
Bolt w/Washer (for oil cooler stay)
2
KIT #2
Valve Body Modification Kit Components
P/N:
04006-10235
Part No.
Part Name
Qty
32909-35020
Clamp
1
32926-30020
Cushion, Oil Cooler Tubs
2
35339-30050
Gasket, Oil Strainer
1
35433-30052
Gasket, Valve Body No. 1
1
35434-30052
Gasket, Valve Body No. 2
1
35168-22011
Gasket, Automatic Transmission Oil Pan
1
90301-10189
Ring, O
2
90404-16021
Union, Front (for oil cooler tube)
1
90407-16010
Union, Rear (for oil cooler tube)
1
90445-14078
Hose (for oil cooler inlet)
1
90462-12044
Clamp
1
90461-06188
Clamp
1
90501-16083
Spring, Compression (for check valve)
1
Section 1 - Oil Cooler
SECTION 1
Installation Procedure For
Oil Cooler Kit #1, Air-cooled Transmission (P/N 04006-10135)
Step 1 Assemble the air-cooled oil cooler using the following procedure:
A.
Assemble the two unions, using the supplied O-rings, to the oil cooler, and torque the unions to 16 ft.lbs. (222 kg-cm)
Figure 1 - Front View