Pickup 4WD L4-2366cc 2.4L SOHC (22R) (1984)
Counter Gear: Technical Service Bulletins
M/T - Counter Gear Shortened
REFERENCE TRANSMISSION AND CLUTCH
NUMBER 015
DATE 3-2-84
MODEL RN38/48/44, LN44
Counter Gear
For parts standardization, the counter gear has been modified as shown below..
Part Name
Modification
Counter Gear
Shortened (Length A=21.5 mm)
Snap Ring
Discontinued
Bearing
Discontinued
Oil Receiver Pipe
Added
PART NUMBER INFORMATION:
Previous Part Number
New Part Number
Part Name
33421-35071
33421-35H02*
Gear, counter (set)
90365-18002
Discontinued
Bearing or roller
90521-38001
Discontinued
Ring, snap, counter gear
ring bearing
*33421-35H02 (counter gear) is a set part number. The set part number consists of the new counter gear and new oil receiver pipe (33124-26011).
Set Part Number
Components
33421-35H02
Counter Gear (33421-35072)
Oil Receiver Pipe (33124-26011)
Important
When a new counter gear is used on an earlier transmission, it is necessary to remove the snap ring (90521-38001) and bearing (90365-18002) from the
extension housing and then install a new oil receiver pipe (33124-26011) where the bearing was removed. The oil receiver pipe is required to provide
proper lubrication to the counter gear.