Pickup 4WD L4-2366cc 2.4L SOHC (22R) (1984)
Synchronizer Ring: Testing and Inspection
G52 Transmission
SYNCHRONIZER RING INSPECTION
(a) Turn the ring and push it in to check the braking action.
(b) Measure the clearance between the synchronizer ring back and the gear spline end.
Standard clearance:
1.0 - 2.0 mm (0.039 - 0.079 in.)
Minimum clearance:
0.8 mm (0.031 in.)
If the clearance is less than the limit, replace the synchronizer ring.