Pickup 4WD L4-2366cc 2.4L SOHC (22R) (1984)
/Page-515001.png)
Input Shaft: Service and Repair
Input Shaft Seal
G52 Transmission
FRONT BEARING RETAINER OIL SEAL REPLACEMENT
(a) Using a screwdriver, pry out the oil seal.
(b) Using SST, press in a new oil seal.
SST 09223-50010
Drive in depth:
12.2 - 13.2 mm (0.480 - 0.520 in.)
Transmission case installation surface
W46, W55, and W56 Transmissions
FRONT BEARING RETAINER OIL SEAL REPLACEMENT
(a) Using a screwdriver, pry out the oil seal.
(b) Using SST, press in a new oil seal.
SST 09608-20012 (09608-03020, 09608-00080)
Drive in depth: 11.4 - 12.0 mm (0.449 - 0.472 in.) from retainer end
