toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Instruments - Wiper Motor Circuit Breaker Inspection|Page 2460 > < Instruments - Wiper Motor Circuit Breaker Inspection
Page 2
background image

NOTE: 

Continuity check can be performed between either the low speed or high speed terminal and the ground terminal of the wiper motor. The standard
resistance of a good wiper motor is approximately 1.5 to 4.5 ohms.

Instruments - Wiper Motor Circuit Breaker Inspection|Page 2460 > < Instruments - Wiper Motor Circuit Breaker Inspection