Pickup 4WD L4-2366cc 2.4L SOHC Turbo (22R-TE) (1986)
Fig. 4 Exploded view of manual steering gear. 1986-88 4WD Pickup & 4Runner
Disassembly
1.
Remove breather plug, then drain gear oil, Fig. 4.
2.
Remove adjusting screw locknut, then the four end cover attaching nuts.
3.
Rotate adjusting screw clockwise, and remove end cover.
4.
Remove sector shaft, using a suitable tool.
5.
On Van models, remove dust cover, then the locknut, using tool No. 09617-30040.
6.
On Pickup and 4Runner models, remove worm bearing adjusting screw locknut, using tool No. 09617-60010.
7.
Remove worm bearing adjusting screw, using suitable tool, then remove worm shaft from gear housing. Do not disassemble ball nut from worm
assembly. If found to be defective, replace entire assembly.
Inspection