Pickup 4WD L4-2366cc 2.4L SOHC Turbo (22R-TE) (1986)
(e) Using a dial indicator, check the shaft runout.
Maximum runout: 0.06 mm (0.0024 in.)
2. CHECK OIL CLEARANCE OF FIRST GEAR
Using a dial indicator, measure the oil clearance between the gear and inner race with the needle roller bearing in- stalled.
Standard clearance:
0.009 - 0.060 mm (0.0004 - 0.0024 in.)
Maximum clearance:
0.15 mm (0.0059 in.)
If the clearance exceeds the limit, replace the gear, inner race or needle roller bearing.
3. CHECK OIL CLEARANCE OF SECOND AND COUNTER FIFTH GEAR
Using a dial indicator, measure the oil clearance between the gear and shaft with the needle roller bearing installed. stalled.
Standard clearance:
2nd gear
0.009 - 0.060 mm (0.0004 - 0.0024 in.)
5th gear
0.009 - 0.062 mm (0.0004 - 0.0024 in.)
Maximum clearance:
0.15 mm (0.0059 in.)
If the clearance exceeds the limit, replace the gear, shaft or needle roller bearing.
4. CHECK OIL CLEARANCE OF THIRD GEAR
Using a dial indicator, measure the oil clearance between the gear and output shaft.
Standard clearance:
0.060 - 0.103 mm (0.0024 - 0.0041 in.)
Maximum clearance:
0.20 mm (0.0079 in.)
If the clearance exceeds the limit, replace the gear or output shaft.