Previa Van 2WD L4-148.8 2438cc 2.4L DOHC (2TZ-FE) (1992)
(b) Pull the tank plates outward.
2. REMOVE TANK
(a) Pull the tank upward.
(b) Remove the 0-ring.
3. (A/T) REMOVE OIL COOLER FROM LOWER TANK
(a) Remove the pipes.
HINT:Make a note of the direction the pipes face.
(b) Remove the nuts, spring washers, plate washers and oil cooler.
(c) Remove the 0-rings from the oil cooler.
ASSEMBLY
1. (A/T) INSTALL OIL COOLER TO LOWER TANK
(a) Clean the 0-ring contact surface of the lower tank and oil cooler.
(b) Install new 0-rings (1) to the oil cooler (2).
(c) Install the oil cooler (2) to the lower tank (3).