Previa Van 2WD L4-148.8 2438cc 2.4L DOHC (2TZ-FE) (1992)
/Page-84001.png)
Turn Signal Switch: Service and Repair
Removal/Installation
1.
Disarm airbag system, refer to MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.
2.
Remove steering wheel, refer to Steering and Suspension/Steering/Steering Wheel/Service and Repair.
3.
Remove steering column upper and lower covers.
4.
Disconnect combination switch electrical connectors, then remove.
5.
Reverse to install, then rearm airbag system, refer to MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.