Previa Van 2WD L4-148.8 2438cc 2.4L DOHC (2TZ-FE) (1992)
/Page-140001.png)
Neutral Safety Switch: Adjustments
Fig. 2 Neutral Start Switch Adjustment
1.
Raise and support vehicle.
2.
Disconnect switch electrical connector.
3.
Loosen neutral start switch adjusting bolt, Fig. 2.
4.
Position transmission shift lever in Neutral.
5.
Align neutral base line and switch groove.
6.
Torque adjusting bolt to 48 inch lbs.
7.
Bend at least two lock washer tabs.