Previa Van 2WD L4-148.8 2438cc 2.4L DOHC (2TZ-FE) (1992)
/Page-930005.png)
-
Fit the lower end of the coil spring into the gap of the spring seat of the shock absorber.
e. Install the upper insulator and spring seat.
f.
Install the dust seal and suspension support.
g. Using SST to hold the spring seat, install a new nut. SST 09729-22031
Torque: 47 N.m (476 kgf.cm. 34 ft.lb)
h. Rotate the spring seat so that the "OUT" mark of the spring seat is toward the outside of the vehicle.
i.
Remove the SST.
2. INSTALL SHOCK ABSORBER WITH COIL SPRING
