Previa Van 2WD L4-148.8 2438cc 2.4L DOHC (2TZ-FE) (1992)
/Page-930008.png)
10. (4WD) INSTALL DRIVE SHAFT LOCK NUT
a. While applying the brakes, install the nut.
Torque: 226 N.m (2,300 kgf.cm. 166 ft.Ib).
b. Install the lock cap and a new cotter pin.
11. INSTALL FRONT WHEEL AND LOWER VEHICLE
Torque: 103 N.m (1.050 kgf.cm. 76 ft.lb).
12. INSPECT WHEEL ALIGNMENT
Inspection
1. INSPECT SHOCK ABSORBER
Compress and extend the shock absorber rod and check that there is no abnormal resistance or unusual operation sounds.
-
If there is any abnormality, replace the shock absorber with a new one.