toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Campaign - Replace Cylinder Head Gasket % Core Plugs|Page 918 > < Description of On-Board Diagnostics|Page 908
Page 1
background image

Technical Service Bulletin # SSCL05

Date: 900928

Campaign - Replace Cylinder Head Gasket % Core Plugs

 September 28, 1990
TO:

ALL REGION/PRIVATE DISTRIBUTOR GENERAL MANAGERS

SUBJECT:

SPECIAL SERVICE CAMPAIGN - L05

Toyota will initiate a special service campaign to replace the cylinder head core plugs and gaskets with an improved design on certain 1991 Toyota
Previas. In addition, the engine oil and oil filter of each vehicle will be changed.

The following vital information is provided to inform you and your staff of the campaign schedule and your degree of involvement required:

1.

Dealer, Owner Notification

^

Dealer notification package mailing date: October 5, 1990 (copy attached)

^

Owner notification letter mailing date: October 12, 1990

2.

Number of Vehicles Involved in Your Region

^

Please refer to the enclosed SSC L05 summary report, by region/district/dealer. This list indicates the number of vehicles involved in this
campaign in your region.

^

This list may be utilized by your staff for future follow up.

Please review this entire special service campaign package with your staff and make sure that all appropriate personnel are completely familiar with its
contents so that they may provide the necessary support to your dealers and maximize our combined customer satisfaction efforts.

Your cooperation in this matter would be greatly appreciated.

Administrative Information

October 5, 1990

TO:

ALL TOYOTA DEALERS AND SERVICE MANAGERS

SUBJECT:

SPECIAL SERVICE CAMPAIGN - L05

Toyota will initiate a special service campaign to replace the cylinder head core plugs and gaskets with an improved design on certain 1991 Toyota
Previas. In addition, the engine oil and oil filter of each vehicle will be changed.

There is a possibility that the engine coolant may leak from the cylinder head core plugs into the engine oil and, in the worst case, cause the engine not to
start. You are requested, using the following information, to replace the cylinder head core plugs and gaskets with an improved design and to replace the
oil and oil filter on the vehicles involved in this campaign, including any vehicles currently in your stock.

Note:

You will be sent SSC notifications with your dealer's name and address for vehicles which, according to our record, you have in stock. If
any vehicles in your stock involved in this campaign have been sold to an ultimate customer prior to receipt of this notification, please
contact this known customer and perform the necessary repairs.

1.

Owner Notification Letter Mailing Date

October 12, 1990 (copy attached)

Campaign - Replace Cylinder Head Gasket % Core Plugs|Page 918 > < Description of On-Board Diagnostics|Page 908