Previa Van 4WD L4-148.8 2438cc 2.4L DOHC (2TZ-FE) (1991)
![background image](/toyota/previa_van_4wd/l4-148.8_2438cc_2.4l_dohc_(2tz-fe)/Page-1050002.png)
d. Remove the shims from the pressure plate.
2. REMOVE ROTOR
a. Using SST, remove the snap ring.
SST 07114-84020
ASSEMBLY NOTE: The snap ring should be installed so that its beveled side face up.
b. Using a plastic hammer, tap the rotor off the shaft.
DISASSEMBLY NOTE: Be careful not to damage the pulley when tapping on the rotor.
3. REMOVE STATOR