Previa Van DX 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
b. Check that there is no continuity between terminal and switch body with the switch OFF (switch pin pushed).
3. INSPECT SWITCH OPERATION
Back Door:
a. Check that there is continuity between terminal 1 and 3 with the switch ON (switch pin released).
b. Check that there is no continuity between terminal 1 and 3 with the switch OFF (switch pin pushed).
Door Junction
DOOR JUNCTION INSPECTION
INSPECT DOOR JUNCTION CONTINUITY
1. Using an ohmmeter. connect the positive (+) lead from the slide door junction A" and negative (-) lead to junction "B".
Door Junction Continuity
2. Check that continuity is shown in the chart.