Previa Van DX 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
Load Compensator: Testing and Inspection
Load Sensing Proportioning And By-Pass Valve Components
FLUID PRESSURE CHECK AND ADJUSTMENT
Set Rear Axle Load
1. Set rear axle load.
(a) Set the vehicle unladen.
(b) Measure the rear axle load and note the value.
(c) Set the rear axle load.
Rear axle load: 920 kg (2,028 lbs.)
Install LSPV Gauge And Bleed Air
2. Install Load Sensing Proportioning Valve (LSPV) gauge, Special Service Tool (SST) # 09709 - 29018 and bleed air.
3. Raise front brake pressure to following specification and check rear brake pressure.