Previa Van DX 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
Load Compensator: Service and Repair
REMOVAL
1. Disconnect brake lines.
Disconnect Brake Lines
Using Special Service Tool
(SST) # 09751 - 36011, disconnect the brake lines from the valve body.
Torque 15 Nm (11 ft. lbs.)
2. Remove Load Sensing Proportioning
(LSP) & By-Pass Valve (BV) assembly.
Remove Lock Nut And Disconnect Spring
(a) Remove the lock nut and disconnect the spring from the lower control arm.
Adjust Spring Shaft Length
INSTALLATION NOTE: Set spring length A to initial set length with the adjust nut.
Initial set length: 30 mm (1.18 inch)
Torque 13 Nm (9 ft. lbs.)