toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Diagnostic Trouble Code Tests and Associated Procedures|Page 3370 > < Diagnostic Trouble Code Tests and Associated Procedures|Page 3368
Page 2
background image

° F) and "Hot" is from 50° C (122° F) to 100° C (212° F).

(a) Disconnect the IAC valve connector.

(b) Using an ohmmeter, measure the resistance between terminal +B and other terminals (RSC, RSO).

Resistance:

Cold: 17.0 - 24.5 ohms
Hot: 21.5 - 28.5 ohms

If resistance is not as specified, replace the IAC valve.

(c) Reconnect the IAC valve connector.

Diagnostic Trouble Code Tests and Associated Procedures|Page 3370 > < Diagnostic Trouble Code Tests and Associated Procedures|Page 3368