Previa Van DX 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
8. Disconnect 2 PS idle-up hoses.
9. Disconnect supercharger bypass valve connector.
10
Disconnect brake booster hose from No. 1 air duct.
11
Disconnect A/C idle-up hose from No. 1 air duct.
12
Remove PS hose clamp.
Remove the bolt and clamp.
Torque: 11.5 Nm (120 kg.cm, 9 ft. lbs.)
13. Remove No. 1 hose support bracket.
(a) Disconnect the supercharger magnetic clutch connector from the support bracket.
(b) Remove the 2 bolts and support bracket.
Torque: 7.5 Nm (80 kg.cm, 69 inch lbs.)
14. Remove No. 1 air inlet duct w/ supercharger bypass valve.
(a) Remove the 2 bolts and 2 nuts holding the supercharger bypass valve to the No. 1 air inlet duct.
Torque: 5.4 Nm (55 kg.cm, 48 inch lbs.)
(b) Remove the 5 nuts and No. 1 air inlet duct with supercharger bypass valve.
Torque: 5.4 Nm (55 kg.cm, 48 inch lbs.)
(c) Remove the supercharger bypass valve and No. 1 air inlet duct gaskets.
15. Remove supercharger bypass valve.
Loosen the clamp and remove the supercharger bypass valve.
INSTALLATION
Installation is in the reverse order of removal.
INSTALLATION NOTE: Use a new gasket.