Previa Van DX 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
Alternator Bearing: Service and Repair
Bearings
1. INSPECT FRONT BEARING
Check that the bearing is not rough or worn.
2. IF NECESSARY, REPLACE FRONT BEARING
a. Remove the 4 screws. bearing retainer and bearing.
b. Using a socket wrench and press. press out the bearing.
c. Using SST and a press, press in a new bearing.
SST 09950-60010 (09951-00460)
d. Align the claws of the bearing retainer with the slots of the drive end frame.
e. Install the bearing retainer with the 4 screws.
Torque: 3.0 N.m (31 kgf.cm, 27 in.lbf)