Previa Van DX 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
a. Using Special Service Tool (SST) # 09023 - 00100 or equivalent, disconnect the brake line from the brake hose.
b. Remove the clip and disconnect the brake hose from the body.
4. w/ABS: Remove ABS wire harness bracket.
5. Disconnect Load Sensing Proportioning Valve (LSPV) spring from lower control arm.
Torque: 13 Nm (9 ft. lbs.)
6. Disconnect shock absorber from lower control arm.
7. Remove lateral control rod.
a. Remove the 2 nuts and bolt.
Torque:
Body side: 211 Nm (156 ft. lbs.)
Axle housing aide: 59 Nm (43 ft. lbs.)
INSTALLATION HINT: After stabilizing the suspension, torque the 2 nuts.
b. Remove the lateral control rod with the bushings.
8. Remove lower and upper control arm.
a. Disconnect the parking brake cable from the lower control arm.
b. Lower the rear axle housing and remove the coil spring, upper insulator and lower insulator.
INSTALLATION HINT: Fit the lower and of the coil spring into the gap of the spring seat of the lower control arm.