Previa Van DX 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
E.
Insert the screwdriver through the flexible coupling hole (from the flexible coupling side to the coupling flange side), then apply rotational
force to disengage the flexible coupling collar from the flange.
5.
Clean the bearing, the propeller shaft tube and the coupling flange.
A.
Using an air nozzle, remove the dust from the engagement surface of the flexible coupling collar.
B.
Using a shop rag, wipe off the dirt on the bearing and the centering pin of the coupling flange.
NOTE:
^
Do not use any cleaners.
^
Protect the centering section of the propeller shaft tube from being contaminated with dirt.
6.
Install the new rear flexible coupling.
A.
Connect the new flexible coupling to the shaft.