Previa Van LE 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
(k) Connect the ground strap to the equipment drive housing.
Torque: 25 Nm (250 kg.cm, 24 ft. lbs.)
2. Install No. 1 equipment drive housing stay.
Install the No. 1 equipment drive housing stay with the 3 bolts.
Torque: 18 Nm (185 kg.cm, 13 ft. lbs.)
3. Install No. 1 intake air connector bracket.
Install the bracket with the 2 bolts.
Torque: 18 Nm (185 kg.cm, 13 ft. lbs.)
4. Install No. 2 equipment drive housing insulator and No. 3 equipment drive housing stay.
(a) Place the insulator and stay on the body bracket.
(b) Install the 2 nuts holding the insulator to the stay, in several passes, in the sequence shown.
Torque: 25 Nm (250 kg.cm, 18 ft. lbs.)