toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Equipment Drive Shaft|Page 1491 > < Equipment Drive Shaft|Page 1489
Page 9
background image

Torque: 28 Nm (290 kg.cm, 21 ft. lbs.)

8. Install front differential.
9. Install front propeller shaft.

10. Install and adjust drive belt for A/C compressor.
11. Install and adjust drive belt for supercharger.
12. Install and adjust drive belt for generator and Power Steering (PS) pump.
13. Install fluid coupling w/ cooling fan.

Torque: 13.5 Nm (135 kg.cm, 10 ft. lbs.)

14. Install No. 2 fan shroud.
15. Install air duct.
16. Check installation of negative (-) terminal cable to battery. See: Service Precautions
17. Install No. 1 engine under cover.
18. Start engine and check for abnormal sound or vibration.

Equipment Drive Shaft|Page 1491 > < Equipment Drive Shaft|Page 1489