toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Heating and Air Conditioning > < Wheel Fastener|Front
Page 1
background image

Wheel Fastener: Service and Repair
Rear

1. Remove rear wheel.
2. Remove brake drum or disc.

3. Remove hub bolt. Using SST # 09628 - 10011 or equivalent, remove the hub bolt.

4. Install hub bolt. Install a washer and nut to the hub bolt shown in the illustration, and install the hub bolt by tightening the nut.
5. Install brake drum or disc.
6. Install rear wheel.

Torque: 103 Nm (76 ft. lbs.) 

Heating and Air Conditioning > < Wheel Fastener|Front