toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Drive Axles, Bearings and Joints > < Front Differential Seals|Page 4518
Page 3
background image

8. Adjust drive pinion preload.
9. Stake drive pinion nut.

10. Install front propeller shaft.

11. Fill differential with differential oil. 

Torque: 39 Nm (29 ft. lbs.) 
Oil type: Hypoid gear oil API GL - 5 
Recommended oil viscosity:

Above - 18° C (0° F) SAE 90
Below - 18° C (0° F) SAE 80W - 90 or 80W

Capacity: 1.05 liters (1.1 US qts.) 

Drive Axles, Bearings and Joints > < Front Differential Seals|Page 4518