Previa Van RWD L4-148.8 2438cc 2.4L DOHC SC (2TZ-FZE) (1996)
2.
The middle bracket lower outboard attachment hole is no longer required for attachment as shown in figure 2.
3.
Drill a 1/4" hole midway between the existing bottom and middle attachment holes in the rear bracket as shown in figure 3.
4.
Coat the new hole with an anti-corrosive coating, such as Tectyl or 3M Pro Autobody sealant.
5.
Install the rear bracket according to the installation instructions enclosed in the kit.