Previa Van RWD L4-148.8 2438cc 2.4L DOHC SC (2TZ-FZE) (1996)
4. ACCEL CONTROL
During cruise control driving, while the ACCEL switch is turned ON, the cruise control actuator pulls the throttle cable to open the throttle valve
and increase the vehicle speed. The vehicle speed when the ACCEL switch is turned OFF is memorized and the vehicle continues at the new set
speed.
5. RESUME CONTROL
Unless the vehicle speed falls below the minimum speed limit (approx. 40km/h, 25mph) after canceling the set speed by the cancel switch,
pushing the resume switch will cause the vehicle to resume the speed set before cancellation.
6. CANCEL MECHANISM
If any of the following operations occurs during cruise control operation, the magnetic clutch of the actuator motor turns OFF and the motor
rotates to close the throttle valve and the cruise control is released.
^ Depressing the brake pedal (stop light switch ON). "signal input to TERMINAL 16 of ECU"
^ Parking brake lever pulled up (parking brake switch ON). "signal input to TERMINAL 3 of ECU"
^ Push the main switch (main SW OFF). "signal input to TERMINAL 4 of ECU".
^ Push the cancel switch (cancel switch ON). "signal input to TERMINAL 18 of the ECU"
^ Placing the shift lever in "N" position (park/neutral position SW ON) . The signal is input to TERMINAL 2 of ECU