Previa Van RWD L4-148.8 2438cc 2.4L DOHC SC (2TZ-FZE) (1996)
Use a good brand of ethylene-glycol base coolant, mixed according to the manufacturers directions. Using coolant which includes more than 50 %
ethylene-glycol (but not more than 70 %) is recommended.
NOTICE:
-
Do not use alcohol type coolant.
-
The coolant should be mixed with demineralized water or distilled watef.
(f) Add coolant until the "FULL" line.
Coolant capacity (w/Heater): 1.6 liters (12.3 US qts, 10.2 Imp. qts)
(g) While the engine is idling (for at least 10 min.), add coolant up to the reservoir tank to "FULL" level. Securely tighten the reservoir tank cap.
(h) Stop the engine after running the engine for five minutes at 2,000 - 3,000 rpm.
(i) After the coolant drops, remove the reservoir tank cap and add coolant up to the reservoir tank inlet to "FULL" level. Securely tighten the
reservoir tank cap.
(j) Start the engine and check for leaks.