Previa Van RWD L4-148.8 2438cc 2.4L DOHC SC (2TZ-FZE) (1996)
Accessory Shaft: Service and Repair
Service Precautions
PRECAUTIONS
1. The flexible coupling i8 not to be disassembled. Do not re-use a flexible coupling which has been disassembled.
2. The drive shaft must be installed in a straight line without forcing it.
The flexible coupling is made of rubber, so it is easily bent out of shape.
Accordingly, when doing servicing related to the drive shaft, observe the following precautions.
(a) Do not disconnect the rear end of the drive shaft from the engine and leave the drive shaft resting at an angle for a long period.
When leaving the drive shaft disconnected for lonc periods, support it with a sling so that it is horizontal, in a straight line with the engine.
Fig. 21 Driveshaft Storage
(b) Store the drive shaft in a straight line without bending it.