Previa Van RWD L4-148.8 2438cc 2.4L DOHC SC (2TZ-FZE) (1996)
![background image](/toyota/previa_van_rwd/l4-148.8_2438cc_2.4l_dohc_sc_(2tz-fze)/Page-320001.png)
Air/Fuel Mixture: Testing and Inspection
This check is used only to determine whether or not the idle CO/HC complies with regulations.
1. INITIAL CONDITIONS.
-
Engine at normal operating engine coolant temperature.
-
Air cleaner installed.
-
All pipes and hoses of air induction system connected.
-
All accessories switched OFF.
-
All vacuum lines properly connected.
HINT: All vacuum hoses for EGR systems, etc. should be properly connected.
-
MFI system wiring connectors fully plugged.
-
Ignition timing set correctly.
-
Transmission in neutral position.
-
Tachometer and CO/HC meter calibrated by hand.
2. START ENGINE.
3. RACE ENGINE AT 2,500 RPM FOR APPROX. 180 SECONDS.
4. INSERT CO/HC METER TESTING PROBE AT LEAST 40 cm (1.3 ft) INTO TAILPIPE DURING IDLING.
5. IMMEDIATELY CHECK CO/HC CONCENTRATION AT IDLE AND/OR 2,500 RPM.
HINT: When performing the 2 mode (2,500 rpm and idle) test. follow the measurement order prescribed by the applicable local regulations.