Previa Van RWD L4-148.8 2438cc 2.4L DOHC SC (2TZ-FZE) (1996)
/Page-391001.png)
Three Way Catalytic Converter: Service and Repair
FRONT THREE-WAY CATALYTIC CONVERTER REPLACEMENT
1. Remove three-way catalytic converter (Front Exhaust Pipe).
2. Install three-way catalytic converter (Front Exhaust Pipe).
REAR THREE-WAY CATALYTIC CONVERTER REPLACEMENT
1. Remove three-way catalytic converter.
-
Jack up the vehicle.
-
Check that the converter is cool.
-
Remove the 4 bolts and 2 brackets at the front and rear of the converter.
-
Remove the converter and 2 gaskets.
2. Install three-way catalytic converter.
-
Place new gaskets on the front and rear of the converter, and connect the converter to the exhaust pipes with the bolts and brackets.
-
Torque the bolts.
Torque: 43 Nm (32 ft lb)