toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Removal/Installation|Page 4684 > < Headlamp Relay|Locations|Page 4679
Page 1
background image

Headlamp Switch: Service and Repair
Removal/Installation

1.

Disarm airbag system, refer to Air bag Arming & Disarming Procedures. 

2.

Remove steering wheel, refer to Steering and Suspension/Steering/Steering Wheel/Service and Repair. 

3.

Remove steering column upper and lower covers.

4.

Disconnect combination switch and spiral cable electrical connectors, then remove combination switch.

5.

Reverse to install, then rearm airbag system, refer to Air bag Arming & Disarming Procedures. 

Removal/Installation|Page 4684 > < Headlamp Relay|Locations|Page 4679