Previa Van RWD L4-148.8 2438cc 2.4L DOHC SC (2TZ-FZE) (1996)
Engine RPM Sensor (NE signal): Testing and Inspection
INSPECTION
NOTICE: Cold and Hot in the following sentences express the temperature of the sensor itself. Cold Is from -10°C (14°F) to 50°C (122°F) and Hot is
from 50°C (122°F) to 100°C (212°F).
1. Disconnect crankshaft position sensor connector.
2. Inspect crankshaft position sensor resistance.
-
Using an ohmmeter measure the resistance between terminals.
Resistance (Cold): 1,630 - 2,740 Ohms
Resistance (Hot): 2,065 - 3,225 Ohms
-
If the resistance is not as specified, replace the crankshaft position sensor.
3. Reconnect crankshaft position sensor connector.