Previa Van RWD L4-148.8 2438cc 2.4L DOHC SC (2TZ-FZE) (1996)
/Page-730001.png)
Idle-Up Valve: Service and Repair
REMOVAL
1. Remove idle-up valve.
-
Disconnect the following connector and hoses:
-
(1) Idle-up valve connector.
-
(2) Air hose (from air cleaner hose) from port E of idle-up valve.
-
(3) Air hose (from air connector vent pipe) from port F of idle-up valve.
-
Remove the bolt and idle-up valve.
INSTALLATION
1. Reinstall idle-up valve.
-
Install the idle-up valve with the bolt.
-
Connect the following connector and hoses:
-
(1) Idle-up valve connector.