Testing and Inspection: Idle Speed/Throttle Actuator for 24L DOHC SC (1996)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
REMOVAL
1. Remove throttle body.
2. Remove idle air control valve.
-
Remove the thermal vacuum valve.
-
Remove the 4 screws, idle air control valve and gasket.
INSTALLATION
1. Install idle air control valve.
-
Place a new gasket on the throttle body.
-
install the idle air control valve with the 4 screws.
-
Apply adhesive to the threads of the thermal vacuum valve.
Adhesive: Part No. 08833-00070, THREE BOND 1324 or equivalent
-
Install the thermal vacuum valve. First temporarily torque the thermal vacuum valve at 12 N.m (9 ft lb)