Previa Van RWD L4-148.8 2438cc 2.4L DOHC SC (2TZ-FZE) (1996)
Mass Air Flow Meter: Service and Repair
REMOVAL
1. Disconnect negative (-) terminal cable from battery.
CAUTION: Work must be started after 90 seconds from the time the ignition switch is turned to the LOCK position and the negative (-) terminal
cable is disconnected from the battery.
2. Remove air cleaner cap and mass air flow meter.
-
Disconnect the mass air flow meter connector.
-
Remove the bolt holding the A/C idle-up valve to the air cleaner cap.
-
Loosen the air cleaner hose clamp.
-
Loosen the 4 clips, and remove the air cleaner cap and mass air flow meter.
3. Remove mass air flow meter from air cleaner cap.
-
Remove the 2 bolts and mass air flow meter.
INSTALLATION
1. Install mass air flow meter to air cleaner cap.