Previa Van RWD L4-148.8 2438cc 2.4L DOHC SC (2TZ-FZE) (1996)
/Page-146001.png)
Ignition Switch: Service and Repair
NOTE: On models with coded audio anti-theft systems, refer to Technician Safety Information for code procedures.
1.
Disconnect battery ground cable. Disarm airbag system, refer to Technician Safety Information.
2.
Remove steering column upper and lower covers.
3.
Disconnect ignition switch electrical connectors.
4.
Turn ignition key to ACC position, then remove ignition key cylinder.
5.
Remove ignition switch attaching screws, then remove.
6.
Reverse to install, then rearm airbag system, refer to Technician Safety Information. If audio system was disabled, activate as outlined under
Technician Safety Information.