Previa Van RWD L4-148.8 2438cc 2.4L DOHC SC (2TZ-FZE) (1996)
/Page-162001.png)
Transmission Speed Sensor: Service and Repair
VEHICLE SPEED SENSOR NO.1 REPLACEMENT
1. Disconnect NO.1 vehicle speed sensor connector.
Vehicle Speed Sensor NO.1
Vehicle Speed Sensor NO.1
2. Remove NO.1 vehicle speed sensor.
(a) Remove the bolt, retaining plate and pull out NO.1 vehicle speed sensor.
(b) Remove the 0-ring from the NO.1 vehicle speed sensor.
(c) Install new 0-ring on the NO.1 vehicle speed sensor.
3. Install vehicle speed sensor assembly.
Torque: 16 Nm (160 kgf.cm< 12ft lbf)
4. Connect vehicle speed sensor connector.
Note: Intsallation is the reverse order of removal.
VEHICLE SPEED SENSOR NO.2 REPLACEMENT