Previa Van RWD L4-148.8 2438cc 2.4L DOHC SC (2TZ-FZE) (1996)
Starter Relay: Testing and Inspection
Fig. 10 Starter Relay Inspection.
1.
Using a suitable ohmmeter, check relay continuity as follows:
a. Ensure continuity between terminal Nos. 1 and 3, Fig. 10.
b. No continuity should exist between terminal Nos. 2 and 4.
c. If continuity is not as indicated, replace relay.
2.
Using suitable ohmmeter, inspect relay operation as follows:
a. Apply battery voltage across terminal Nos. 1 and 3.
b. Using suitable ohmmeter, ensure continuity exists between terminal Nos. 2 and 4.
c. If continuity is not as indicated, replace relay.