Prius L4-1.5L (1NZ-FXE) (Hybrid) (2003)
_(hybrid)/Page-1115001.png)
Blower Motor: Service and Repair
Removal and Installation
REMOVAL
1. REMOVE GLOVE COMPARTMENT DOOR
2. DISCONNECT CONNECTOR
3. REMOVE BLOWER UNIT
a. Using a knife, cut off the reinforcement of glove compartment.
HINT: At the time of installation, please refer to the following item.Install the glove compartment door reinforcement (supply parts), instead
of cutting reinforcement.
Part No.: 55558-47010
b. Remove the 2 bolts and ECM & EMPS ECU.