toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

HV/Auxiliary Batteries - Service/Maintenance|Page 1619 > < HV/Auxiliary Batteries - Service/Maintenance|Page 1617
Page 3
background image

5.

Turn and hold the ignition switch to "START" with the brake pedal depressed. The vehicle has started when the "READY" indicator
remains on steady and a beep sounds. Then, release the ignition key.

6.

Keep the "READY" light on for 30 minutes.

NOTE:

When remaining capacity of HV Battery is low, the gasoline engine automatically starts and HV battery is charged by the generator (indicated
as the ELEC. MOTOR on the multi-information display.) The 12-volt auxiliary battery is also charged by HV battery regardless of the gasoline
engine operation.

B.

Vehicle Storage - Disconnect Negative Battery Terminal from 12-volt Auxiliary Battery.

1.

Turn off all lights and accessories.

2.

Remove ignition key.

3.

Remove the auxiliary battery cover.

4.

Disconnect the negative terminal from the auxiliary battery.

HV/Auxiliary Batteries - Service/Maintenance|Page 1619 > < HV/Auxiliary Batteries - Service/Maintenance|Page 1617